Mar 10, 2021
By: Team Made In
Given the negative association between rust and cookware, it’s totally normal to be a little freaked out when you first see those brown rust spots on your pan.
But fear not! Removing a rust stain from a carbon steel pan is easy and your pan will perform just as good (if not better!) after the rust has been removed.
If you are wondering how to remove rust from steel, we are here to help. In this article, you’ll learn about carbon steel rust and how to get a rusted carbon steel pan performing good as new!
Unfortunately, it's going take more than a little dish soap to clean rust. If surface rust has developed on your carbon steel pans, you're going to need the right tools and a little elbow grease to get your cookware as good as new. Luckily with a few tips, you'll be able to not only clean rust but also prevent rust from forming. By following these tips, you'll be able to get your
carbon steel cookware
in tip-top shape.
When it comes to learning how to remove rust from pans, it's important you know what kind of material you are working with. Unlike
stainless steel cookware
, carbon steel is capable of rusting if left in a moist environment for an extended period of time. This is due to the presence of oxidizable iron in carbon steel’s alloy, which is what also allows cast iron to rust.
Most carbon steel pan owners will only have to worry about their cookware rusting after it’s been exposed to water for an extended period of time. Extensive rust commonly occurs after a cleaning.
For the purpose of preventing stubborn rust, it is strongly advised that you do the following after every cleaning you do that incorporates the use of water:
Dry the pan by hand.
Put the pan on your stove.
Heat dry the pan over low heat until all remaining water has evaporated.
Lightly coat the inside of the hot pan with a high smoke point cooking oil to form a very thin layer.
Remove the pan from the heat and allow the pan to cool.
Wipe away excess oil (if any) and store.
A protective coating of oil can make all the difference when it comes to prevent stubborn rust. If you live in a particularly humid area and/or are using your carbon steel pan outdoors, there is an additional risk of your pan rusting. In cases such as these, you’ll need to take extra precautions to shield your pan from this environmental moisture. For example, seasoning the exterior of your pan to decrease the amount of surface iron will help prevent a rust stain from developing.
Already have a rusted area on your pan? No worries! Let’s get into how to remove it with just a little effort and elbow grease!
There are a number of ways to remove rust from your carbon steel pan. Here are two of the most popular methods:
The least invasive rust removal method, this process uses coarse salt and oil to scour away surface rust from anywhere on a pan. This method is most commonly used for a small to medium sized rust spot, but it also works on larger rust areas as well.
Pour some coarse salt on the rust as well as vegetable oil (or any cooking oil).
Scrub the salt and oil into the rust with a paper towel or soft cloth using a small circular motion until the rust has been removed.
Reseason the pan (unless the issue was minor, in which case clean, dry, and store pan using the method mentioned above).
This method involves using a coarse scrubber such as a scouring pad, steel wool, an abrasive sponge, or fine grit sandpaper to forcibly remove rust from your pan’s surface. It’s great for removing rust from anywhere on the pan, including the pesky bottom of the pan. Once you have scrubbed and rinse, be sure to fully dry your cast iron or carbon steel with a dry cloth.
Using a small circular motion, scrub at the rust with your coarse scrubber or steel wool until removed.
Rinse the pan with hot soapy water.
Reseason the pan.
For interior heavy rust that just won’t go away, this method should do the trick and help prevent rust in the future. A reseasoning is required after this method as the vinegar will strip away your pan’s built up seasoning.
Bring equal parts water and vinegar to a boil over medium heat (we've noticed rice vinegar seems to work best).
Pour out the mixture.
Scrub the pan with soap and hot water.
Reseason the pan.
Because removing heavy rust from carbon steel also results in the removal of some of your pan’s built up seasoning, it’s important to season the pan again afterwards. Made In offers
Carbon Steel Seasoning Wax
that is great as a seasoning starter. For advice on how to reseason a pan, check out our blog on
seasoning carbon steel
If you’re looking for a brand new carbon steel pan, browse our Carbon Steel collection or
carbon steel frying pans
carbon steel sets